1200W to 2000W charger for 3S 4S 7S 8S 10S 12S 13S 14S 16S 20S Lithium ion 12V 24V 36V 48V 60V 72V VRLA battery Charger


This  charger can be made for 3S to 24S Li ion or Lifepo4 battery type voltage with different current :
3S Li ion 12.6V 50A | 4S Li ion 16.8V 50A | 4S Lifepo4 14.6V 50A | 7S Li ion 29.4V 50A | 6S Li ion 25.2V 50A | 8S Lifepo4 29.2V 50A | 8S 33.6V Li ion 50A | 10S Li ion 42V 40A | 12S 43.8V Lifepo4 40A | 13S Li ion 54.6V 30A | 14S Li ion 58.8V 30A | 16S Lifepo4 58.4V 30A | 15S lifepo4 54.8V 30A | 16S Li ion 67.2V 27A | 15S Li ion 63V 27A | 17S Li ion 71.4V 27A | 20S Lifepo4 73V 27A | 20S Li ion 84V 22A | 24S Lifepo4 22A

Client can select different specification in according to demand as above ,please inform us by email :james@lithiumbatterypcb.com for any current adjust or voltage adjustment . also for which type of DC connector will you need .

SKU: L1300-2000W-charger Category:


This high quality alloy type charger has such characteristic as belowing  :
1. Application : For 3S~24S Li ion or Lifepo4 Battery  with 22A~50A constant Charge  current
2.AC power :100V~132V or 200V~240V ( AC plug will be shipped in according to client’s country demand based ib shipping address ,if you want to change the AC plug , please leave message to us )
4.Dimension :260*158*92mm
5. Weight :4.0kg
6.short-circuit protection,charger o/p current automatically when short-circuit.
7.overload protection:charger o/p current limited automatically when overload.
8.reverse polarity protection:it will shut down when the wire is connected,charge DC fuse or remove the fault.
9.2-stages charging mode: CC(constant current), CV(constant voltage) .
10.Excellent fan cooling technology enable your charger get away from any potential over-heating risk and make your charger works longer and
more stable .
11.Charging state:two LED display.
12.Fuses works to provide double protection from any external damages
13.All kinds of production has passed the CE certification.
14.Automatically cut-off : the charger cut-off automatically when the battery was fully charged ,
15.Efficiency: ≥95 %( full capacity)Photo-Display
12.6V 50A Lithium Battery charger
73V 15A Lifepo4 Battery charger
1.To check if your local power supply conformsto charger input voltage 110 or 230V,then connect the charger system to a wall socket , if charger
has switched to OFF position ,it must be set to ON status .
2.LED1 (RED ) confirms AC power on an LED2 Green confirms if the charger connects well or not
3.Connect the plug or the DC output cord to battery terminals ,it indicates the charger is charging the battery when the red light turns on ,and
the battery will be fully charged when the battery was charged fully .
Notes : if the charger with a Relay for reverse polarity prouction , it does not have output voltage and current when the Charger AC power on
but disconnecting with the battery , it will have voltage an current output when it connects with battery , if the charger has a fuse instea of Relay
for reverse polarity protection , it has output once AC power on .
1. the phenomenon of sparking is normal when it connects to the battery because of high current
2. This charger is designed for charging lithium tupe batteries only
3. Avoid charging the wrong type battery
4. Always place the charger in well-ventilated and dry environments
5. The charger is designed with aluminum case as its heat sink , do not cover it to avoid the case from being overheated while charging
6. Do not disassemble charger ,take it to qualified service person when service or repair is required
1. Orders processed timely after the payment verification.
2. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.
3. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
4. Due to stock status and time differences, we will choose to ship your item from our first available warehouse for fast delivery.
5. Delivery time depends on destination and other factors, If you don`t receive the item after 20 days, please contact us, We will track.

Additional information

Weight 4.5 kg
Specification selection

3S Li ion 12.6V 50A, 4S Li ion 16.8V 50A, 4S Lifepo4 14.6V 50A, 7S Li ion 29.4V 50A, 6S Li ion 25.2V 50A, 8S Lifepo4 29.2V 50A, 8S 33.6V Li ion 50A, 10S Li ion 42V 40A, 12S 43.8V Lifepo4 40A, 13S Li ion 54.6V 30A, 14S Li ion 58.8V 30A, 16S Lifepo4 58.4V 30A, 15S lifepo4 54.8V 30A, 16S Li ion 67.2V 27A, 15S Li ion 63V 27A, 17S Li ion 71.4V 27A, 20S Lifepo4 73V 27A, 20S Li ion 84V 22A, 24S Lifepo4 22A


There are no reviews yet.

Be the first to review “1200W to 2000W charger for 3S 4S 7S 8S 10S 12S 13S 14S 16S 20S Lithium ion 12V 24V 36V 48V 60V 72V VRLA battery Charger”

Your email address will not be published. Required fields are marked *