4S Lifepo4 12.8V or 3S 12.6V Lithium Battery PCB board with 250A constant discharge current for auto emergency jump starter battery

$45.20$75.80

This BMS was designed specially for 4S or 8S 3.2V Lifepo4 Battery application for emergency auto car jump starter battery or other application with 100A  200A or 300A constant discharge current .

Features and characteristics :

  •  For 4S 14.6V or 8S 29.2V Lifepo4 Battery application
  •  With Balance function max  balance current will be 180mA
  • With full set of protection functions : such as Over-charge and over-discharge protection , over-current protection , short circuit protection
  • with extremely low quiescent current consumption
  • with Wire disconnection protection function . ( the BMS will not have the output when there is any one balance wire was disconnected  so as to keep your battery in good healthy condition )

Description

This BMS was designed specially for 4S or 8S 3.2V Lifepo4 Battery application for emergency auto car jump starter battery or other application with 100A  200A or 300A constant discharge current .

Features and characteristics :

  •  For 4S 14.6V or 8S 29.2V Lifepo4 Battery application
  •  With Balance function max  balance current will be 180mA
  • With full set of protection functions : such as Over-charge and over-discharge protection , over-current protection , short circuit protection
  • with extremely low quiescent current consumption
  • with Wire disconnection protection function . ( the BMS will not have the output when there is any one balance wire was disconnected  so as to keep your battery in good healthy condition )

SPECFICIATION REFERENCE:

4S 8S Lifepo4 BMS applied for energy storage or inverter Battery BMS with 200A 100A or 300A constant current

 

Transaction terms :
1) Shipment time : once received your order ,we will proceed it quickly within 3~4 working days without problems .order can be cancled within these days ,otherwise we will reject to cancle the order ,because our items can not get back when in the process of shipment . we will inform our buyer if  there is a stock problems with the order and arrange a properly agreenment on the shipment schedule by email .

2) Shipment Methods : Client can choose suitable shipment methods based on your demand ,Post air parcel service or Express service , we will ship all orders strictly in according to the selected shipment methods by our customer . normally , Post parcel shipment time takes 7~60days depends on different countries serivce . and express takes 2~15days to the destination normally .

3) About Tracking number : Tracking number will be uploaded and will be informed by the registered email on each Friday ,please pay attention to your email later on for the tracking number update .

4) Quality Service : we will take a full responsibility for any defect product caused by our design and production problems ,warranty time is 12 months since the shipment date . but for any defect product caused by any wrong or slavery application from customers . we will not take the responsibility for that , because for this BMS product ,it do need some skills to make installation . please consult us in advance if you are not clearly with bms connection in the hope of avoid any mistakes of connection . if Buyer damaged the BMS , we can offer the free repairing service to our client , but client should take care of shipment cost .please know it kindly in advance . thanks

Please send email to this address for any questions james@lithiumbatterypcb.com, we will give you reply within 12hours without problems .

 

Additional information

Weight 0.2 kg
Dimensions 13 × 10 × 15 cm
Specification selection

4S lifepo4 100A, 4S Lifepo4 200A, 4S Lifepo4 250A, 8S Lifepo4 100A, 8S Lifepo4 200A

Reviews

There are no reviews yet.

Be the first to review “4S Lifepo4 12.8V or 3S 12.6V Lithium Battery PCB board with 250A constant discharge current for auto emergency jump starter battery”

Your email address will not be published. Required fields are marked *