7S 8S or 10S lithium ion lifepo4 Battery Smart Bluetooth BMS with 80A to 100A constant discharge current

$8.90$61.20

1) Application:this smart BMS can work for 6S 7S or  8S  Lithium ion or Lifepo4 Battery ,client can choose based on your battery chemistry features
2) Current : constant current of this version BMS can be made with 80A to 100A in accoridng to the different demand
3) Dimension:150*102*17mm
4) Functions : has full sets of protection for Li ion or lifepo4 Battery system
5) Communication type :UART
6) With the same charge and discharge port and balance function

7) In order to support our custom with certain quantity , our client can use this coupon code to get better cost :
     200USD~500USD:  coupon code:   20200806
     500USD~1000USD: coupon code : 20200807
     1000USD above:   Coupon Code :  20200808

8) with three Temperature detection

Clear

Description

Notes:all of our Smart BMS with Bluetooth function will equip a Bluetooth Communication module only , and buyer can choose the PC communication Module separately if needs . please know it kindly in advance ,this BMS order  will be dispatched out within 4~5 days without problems .       

Briefly Introductions :
1) Characteristics : This is a smart BMS with UART Bluetooth  Communication function with our Android or IOS
APP , also can communicate with PC computer with our PC software through connection of our PC
2) Widely Application scope  : this BMS can work with 6S 7S 8S  Lithium ion or Lifepo4 Battery  with slightly modification with the support of APP and PC software .
3) With the same charge and discharge port and balance functions
4) with highly  precision degree on SOC, SOH ,voltage and current metering
5) With full set protection functions :
This BMS has applied with high quality IC chip specially for lithium battery protection purpose .highly detection
precision degree on over-charge,over-discharge,voltage balancing ,and with detection on wires disconnection functions,with three layers of over-discharge and over-current detections and delay times in detecting process.( Over-current 1,over current 2,short cicircuit protection ) . short-circuit of charging port ,with two layers protection against over-voltage when charging :
6) with Three temperature detection channel ( one internal and two external )
7) This BMS has installed a switch  connector for ON/OFF button connection .

 

And we can design and produce Battery protection circuit board in according to client’s demand with certain
reasonable order quantity .
Product and accessories List :

A.Mobile Phone APP Display and how to set parameters via APP software with the Bluetooth  Communication module as below.

Photo display

BMS can be made for different cell’s voltage ranges from 7S 24V to 8S at current of 80A to 100A:

This BMS has Bluetooth communication function for 6S 7S 8S Li ion or Lifepo4 24V Battery with 80A to 100A constant current

High quality Smart Bluetooth BMS with 80A 100A constant current

With Android APP to review and set almost parameters of your battery as below

IOS app will dispaly your battery information fully

Our Smart BMS support two types of Phone system android or IOS system
PC communication module

Connection diagram :

Notice of connection  :

A. Firstly ,Please connect bold wires from B- port of the BMS to the negative port of the battery pack .(B- wire should be as short as possible ) ,then connect these voltage detection wires (Please take off these wires from the BMS before connecting these wires to the battery to avoid any connection mistakes )

B. Second ,Please start connect these balance wires to the Battery system from BC0 ,Black thin wire should be connected to the battery negative , and the second wire -white wire BC1 should be connect to the positive port of the first series cell . BC2  should connect to the positive port of second series cell ,and BC3 wire to the third cell’s positive ….connection in this way in order one by one till to the last cell postive port

C. Third . After connection of these balance wires finished , please measure connector voltage from each Neighbouring wires ,the voltage between each neighbouring wires for Li ion battery should be less than 4V and for Lifepo4 Battery should be less than 3.5V ,after confirmation of these wires connection order , you can plug cable connector into the BMS .–wrong connection order will damage our BMS surely . please be carefully with this step .

D. Finally , connect C- wire as negative of charge and discharge , B+ wire as positive of charge and discharge , those wires should

use bold wire to make connection for large current distribution purpose . then please comparing the voltage from the BMS and voltage directly from the Battery to see if they are the same or not . if they are the same value . your connection is correct , otherwise terrible things will happend !!!

shipment

Transaction terms :
1) Shipment time : once received your order ,we will proceed it quickly within 3~4 working days without problems .order can be cancled within these days ,otherwise we will reject to cancle the order ,because our items can not get back when in the process of shipment . we will inform our buyer if  there is a stock problems with the order and arrange a properly agreenment on the shipment schedule by email .

2) Shipment Methods : Client can choose suitable shipment methods based on your demand ,Post air parcel service or Express service , we will ship all orders strictly in according to the selected shipment methods by our customer . normally , Post parcel shipment time takes 7~60days depends on different countries serivce . and express takes 2~15days to the destination normally .

3) About Tracking number : Tracking number will be uploaded and will be informed by the registered email on each Friday ,please pay attention to your email later on for the tracking number update .

4) Quality Service : we will take a full responsibility for any defect product caused by our design and production problems ,warranty time is 12 months since the shipment date . but for any defect product caused by any wrong or slavery application from customers . we will not take the responsibility for that , because for this BMS product ,it do need some skills to make installation . please consult us in advance if you are not clearly with bms connection in the hope of avoid any mistakes of connection . if Buyer damaged the BMS , we can offer the free repairing service to our client , but client should take care of shipment cost .please know it kindly in advance . thanks

Please send email to this address for any questions james@lithiumbatterypcb.com, we will give you reply within 12hours without problems .

 

Additional information

Weight N/A
Dimensions N/A
Specification selection

6S Li ion 100A with UART&RS485, 6S lifepo4 With UART and RS485, 8S Li ion 100A with UART and RS485, 8S Li ion 100A with UART, 8S lifepo4 100A with UART, 8S lifepo4 100A with UART and RS485, 10S Li ion 100A with UART, 7S Li ion 100A with UART, 16S lifepo4 100A with UART and RS485, RS485 PC Module, UART PC Module, Bluetooth Module