13S 54.6V 14S 58.8V Li ion and Lifepo4 4S 14.6V Battery charger with 2A to 8A constant current

$37.60

High quality Charger for Lead acid battery and Lithium Ion Battery ,Lifepo4 Battery  12V 24V 48V ,client can choose suitable charger for your battery with our specification selection.

Clear
SKU: 1230 Category:

Description

feature boarder
This high quality alloy type charger has such characteristic as belowing :1.short-circuit protection,charger o/p current automatically when short-circuit.

2.overload protection:charger o/p current limited automatically when overload.

3.reverse polarity protection:it will shut down when the wire is connected,charge DC fuse or remove the fault.

4.2-stages charging mode: CC(constant current), CV(constant voltage) .

5. Excellent fan cooling technology enable your charger get away from any potential over-heating risk and make your charger works longer and

more stable .

6.Charging state:two LED display.

7. Fuses works to provide double protection from any external damages

8.all kinds of production has passed the CE certification.

9. Automatically cut-off : the charger cut-off automatically when the battery was fully charged ,

10.Efficiency: ≥95 %( full capacity)
Specification border
1

1
2
3
chrge mode border
mode

Operation
1.To check if your local power supply conformsto charger input voltage 110 or 230V,then connect the charger system to a wall socket , if charger has switched to OFF position ,it must be set to ON status .

2.LED1 (RED ) confirms AC power on an LED2 Green confirms if the charger connects well or not

3.Connect the plug or the DC output cord to battery terminals ,it indicates the charger is charging the battery when the red light turns on ,and

the battery will be fully charged when the battery was charged fully .

Notes : if the charger with a Relay for reverse polarity prouction , it does not have output voltage and current when the Charger AC power on but disconnecting with the battery , it will have voltage an current output when it connects with battery , if the charger has a fuse instea of Relay for reverse polarity protection , it has output once AC power on .

Precaution border
1. the phenomenon of sparking is normal when it connects to the battery because of high current

2. This charger is designed for charging lithium tupe batteries only

3. Avoid charging the wrong type battery

4. Always place the charger in well-ventilated and dry environments

5. The charger is designed with aluminum case as its heat sink , do not cover it to avoid the case from being overheated while charging

6. Do not disassemble charger ,take it to qualified service person when service or repair is required
Packlist border
Pack
thanks
Connector
shipment
1. Orders processed timely after the payment verification.
2. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.
3. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
4. Due to stock status and time differences, we will choose to ship your item from our first available warehouse for fast delivery.
5. Delivery time depends on destination and other factors, If you don`t receive the item after 20 days, please contact us, We will track.

Additional information

Weight 1.0 kg
Dimensions 10 x 20 x 17 cm
Specification selection

VRLA 14.7V 8A, VRLA 29.4V 4A, VRLA 58.8V 2A, Li-ion 12.6V 8A, Li-ion 29.4V 4A, Li-ion 54.6V 2A, Lifepo4 14.6V 8A, Lifepo4 29.2V 4A, Lifepo4 58.8V 2A

Reviews

There are no reviews yet.

Be the first to review “13S 54.6V 14S 58.8V Li ion and Lifepo4 4S 14.6V Battery charger with 2A to 8A constant current”

Your email address will not be published. Required fields are marked *