10S 36V PCB and 7S 24V battery BMS with On-OFF Switch and high temperature protection 20A constant discharge current for electric bike water bottle Battery

$17.90 – $745.00

This BMS has applied with high quality IC chip specially for lithium battery protection purpose .highly detection
precision degree on over-charge,over-discharge,voltage balancing ,and with detection on wires disconnection functions,
with three layers of over-discharge and over-current detections and delay times in detecting process.( Over-current 1,
over current 2,short cicircuit protection ),with charging protection functions at the charging port so as to avoid reverse
connection problem from the charger . short-circuit of charging port ,with two layers protection against over-voltage
when charging :This is The PCB for 10 series 36V(42v) or 7S 24V (29.4V )lithium ion battery pack with 20A constant discharge current
and rated 5A charging current .the charge and discharge port is different. Size :Max 56*70*10mm
And we can design and produce Battery protection circuit board in according to client’s demand with certain
Function

SKU: EBK-10S001 Category: Tags: , ,

Description

This BMS has applied with high quality IC chip specially for lithium battery protection purpose .highly detection
precision degree on over-charge,over-discharge,voltage balancing ,and with detection on wires disconnection functions,
with three layers of over-discharge and over-current detections and delay times in detecting process.( Over-current 1,
over current 2,short cicircuit protection ),with charging protection functions at the charging port so as to avoid reverse
connection problem from the charger . short-circuit of charging port ,with two layers protection against over-voltage
when charging :This is The PCB for 10 series 36V(42v) or 7S 24V (29.4V )lithium ion battery pack with 20A constant discharge current
and rated 5A charging current .the charge and discharge port is different. Size :Max 56*70*10mm
And we can design and produce Battery protection circuit board in according to client’s demand with certain
Function

Briefly descriptions
Briefly Introduction with this BMS :

1) This BMS has weak electricity controling switch which could be operated to shut the discharge current when it is closed .
2) BMS has a port to directly connected to your Power indicator panel to show the battery capacity consumption status precisly
3) With High temperature detecting protection to prevent your Battery from any over-heating problems . thus offer a more safe

condition for your battery .
Functions Introductions

Specification

10S Lithium Ion Battery PCB specification

Photo display

36V Lithium Ion Battery PCB board

 

24V Lithium Ion Battery PCB board with 20A constant discharge current

Connection diagram Border
The connection diagram below is for 10S connection , the connection principal is the same for 24V PCB board , if Buyer
does not make sure how to make connection , please feel free to contact us

Reminds : We will send the detail connection drawings to the client with this product   if client needs  and this BMS will includes
all necessoriesconnectors with wire to make sure client can connect it easily . please follow up it correctly to avoid of any mistake

,above connection is only forsimple explaination purpose .

My distinguished customers : you can contac us through trademanager or by email if  you have any further questions with our product

Shipment

Please choose the shipment way as you like ,you you can consider express delivery way if your order is urgent , but you

should afford the extra freight cost by express delivery .

As post by air ,usually it takes around 20-60 days ,please notice it and do not open the disputes easily before reaching

the contact with us ,we will try our best to solve the problem with our joint efforts .

Return policy

We guarantee the product  from us with a 12 months warranty against defects in quality, but we are not responsib

le for buyers’ mistake or wrong handling, our product must be maintained in proper way. If Item is defective and

not working on arrival, please report the item to us within 7 days of receiving the defective product so we can

issue a RMA.

Please contact us to request a return authorization. Please include your name, auction number, and reason for return when

you contact us. All items returned must contain all original packaging materials. Please carefully repack the item. Items

returned will be tested and if found defective, the buyer will be shipped a new replacement unit immediately. In the event

that a suitable replacement is not available a refund will be issued.

The return shipment cost should be afforded by buyer if you can not accept our policy  ,please do not buy the item from us ,fair deal is

importable for both of us .

Feedback

    You satisfaction and positive feedback is very importand to us. Pleae leave positive feedback and 5 stars if you are satisfied with our 

items and services.

 If you have any problems with our itmes or services, please feel free to contact us first before you leave negative feedback. We will do 

our best to solve any problems and provide you with the best customer services.

Additional information

Weight 0.2 kg
Dimensions 8 × 5 × 8 cm
Item Name

10S Lithium Ion Battery PCB board for 36V Li-ion E-bike Battery Pack, Full charge voltage :42V
Order Quantity

1pcs sample, 20pcs, 50pcs
Specification selection

10S 20A Li-ion, 7S 20A Li-ion

Reviews

There are no reviews yet.

Be the first to review “10S 36V PCB and 7S 24V battery BMS with On-OFF Switch and high temperature protection 20A constant discharge current for electric bike water bottle Battery”

Your email address will not be published. Required fields are marked *

Similar Products